Product ID:ROYCO 49
MSDS Date:01/01/1987
FSC:9150
NIIN:00-235-5555
MSDS Number: BDLPG

ROYAL LUBRICANTS COMPANY,INC.

Emergency Phone: (201) 887-3100

Cage: 07950

ROYAL LUBRICANTS COMPANY INC.

518 EAST HANOVER, NJ 07936 US

Telephone: 973-887-7411/7410

Cage: 07950

PETROLEUM HYDROCARBON

Fraction By Weight: UNK

MOLYBDENUM DISULFIDE

CAS: 1317-33-5

RTECS: QA4697000

Fraction By Weight: UNK

OSHA PEL 10 MG/M3 TDUST (MO)

ACGIH TLV: 10 MG/M3 (MO); 8990

DIATOMACEOUS CLAY

Fraction By Weight: UNK

Effects of Overexposure:NONE NOTED BY MFR. LOW TOXICITY & LOW HAZARD TO
HEALTH.

First Aid:ING:DO NOT INDUCE VOMIG.IF ASPIRATION IS CAUSED BY
VOMITG,OBTAIN MEDICAL ATTN IMMEDIATELY;SKIN RASHES AS A RESULT OF
PROLONGED CONTACT OBTAIN MEDICAL ADVICE;EYES:EFFECTED EYES SHOULD
BE WASHED IMMEDIA TELY W/H*2O FOR 15 MINS.

Extinguishing Media:CO*2,DRY CHEMICAL,POWDER OR FOAM EXTINGUISHERS
Fire Fighting Procedures:DO NOT USE WATER JETS.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:USE APPROPRIATE PROTECTV EQUIPMENTS SUCH AS
GLOVES & SAFETY GLASSES/GOGGLES. CLEAN-UP WITH METAL SCRAPERS &
RAGS.SPREAD DRY SAND OR MINERAL ABSORBENT OVER REMAINING GREASE &
SHOVEL INTO SALVAGE CONTAI NERS.

Handling and Storage Precautions:STORE IN COOL DRY PLACE.KEEP
CONTAINERS TIGHT;MFR NOTES NORMAL PROCEDURES & QUALITY CONTROL
REQUIREMENTS.
Other Precautions:WASH HANDS THOROUGHLY WITH SOAP & WARM WATER BEFORE
HANDLING FOOD OR SMOKING.

Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:NONE NOTED BY MFR.
Protective Gloves:AS REQUIRED
Eye Protection:GOGGLES
Other Protective Equipment:WEAR APRONS
Supplemental Safety and Health
MSDS IS UNDATED;SPEC REF:MIL-G-23549C.SINCE ITEM IS GREASE,GENERAL
PURPOSE,THE FLASH POINT USUALLY ABOVE 200F.ALTHOUGH,THE MFR WAS
UNABLE TO GIVE FLASH OR BOILING POINT,DGSC ASSIGNS F6.STG CD

HCC:V6
Spec Gravity:UNK
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GREASE(PASTE-LIKE SOLID)

Stability Indicator/Materials to Avoid:YES
NONE NOTED BY MFR.
Hazardous Decomposition Products:CO,CO*2,OXIDES OF MOLYBDENUM.
Conditions to Avoid Polymerization:UNKNOWN.

Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS MFR SPECIFIED THAT
DRAINAGE SYSTEMS,RIVERS OR WATERWAYS SHOULD NOT BE CONTAMINATED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.